Mods

Polish ASA (Universal)
Polishing your ASA!!
Chances are that your ASA is really dirty from all those years of use. Well here's how to make it look new again. You will need the following materails:
Green Turtle Wax Car Polish
Two Old Rags(One to polish one to wipe)
Your ASA
New orings for the ASA(Optional)
1.Get out the turtle wax and apply I good amount to your asa.
2.Take one rag and buff the wax into the surface.
3.Wipe the excess off with the other rag.
4.Repeat steps 1-3 till your happy with the look of your ASA.
5. If you got new o-rings for the ASA then put them on now. Next put your asa back into your gun and put the screws in and your done!
Courtesy of TechMasterJason

CBEOG
Home \| Gun Info \| Members Guns \| Mods \| Contact \| Links \| Store

Mods Mods for classic Brass Eagle guns.
Vertical ASA (Poison) Vert ASA Install This mod is so that you can use an aftermarket regulator, x-chamber, gas thru grip, or have a vertical tank on your gun. Parts needed 1) Automag vertical adaptor w/screw 2) Macroline kit w/2 90Âº elbows and hose. * Other hoses can be used. 3) Loctite or teflon 4) ASA Reducer Tools needed 1) Drill with 1/4" bit 2) Corresponding Allen wrenches Step 1 Take off the lower reciever. Then drill the hole in front of the lower reciever (Not under the ball detent or your screwed.) with the 1/4" bit so that the Automag vertical screw fits. Step 2 Now attach the Automag vertical adaptor and reattach the lower reciever to the gun. Step 3 Put your in your asa reducer and screw the macroline fittings in. Now attach your macroline hose and your done! Courtesy of TechMasterJason* Polish Internals (Universal) Polishing The Internals Materials: Turtle Wax (Green Kind) (In case you don't know it's sold to polish cars.) Two Old Rags (One to polish one to whip off) Poison Internals New O-Rings For The Internals (Optional) Procedure: 1. If you haven't already take the internals out of your gun. 2. Put wax on the internals and take one of the rags and bluff the wax in. 3. Using the other rag wipe the internals off. 4. Repeat steps two and three until your happy with the results. 5. If you have new o-rings then take off all the old ones using a old dental pick or screwdriver and put new ones on. Courtesy of TechMasterJason Have some mods? E-Mail them here!			Polish ASA (Universal) Polishing your ASA!! Chances are that your ASA is really dirty from all those years of use. Well here's how to make it look new again. You will need the following materails: Green Turtle Wax Car Polish Two Old Rags(One to polish one to wipe) Your ASA New orings for the ASA(Optional) 1.Get out the turtle wax and apply I good amount to your asa. 2.Take one rag and buff the wax into the surface. 3.Wipe the excess off with the other rag. 4.Repeat steps 1-3 till your happy with the look of your ASA. 5. If you got new o-rings for the ASA then put them on now. Next put your asa back into your gun and put the screws in and your done! Courtesy of TechMasterJason Poison ASA just shown as an example, this works on any gun.